Candy Lane Thermostat

Thermostat Manual

WiFi Reset
Change or Reset the WiFi Connection on My WiFi Series Touchscreen Programmable Thermostat

A basic WiFi reset can be completed by removing the thermostat face plate from the wall plate for 30 seconds and then reattaching it. The thermostat will then attempt to reconnect to the previously configured WiFi network. To connect to a new WiFi network:

TH8320WF / RTH8580WF – Proceed to step 1 to “forget” the current WiFi configuration and connect to a new network. If your thermostat is already registered to your account, step 2 and step 3 are not required.

TH8321WF – On the thermostat screen, select Menu – WiFi setup. Press the down arrow until “Disconnect WiFi network?” is displayed and select Yes.

Connecting your thermostat to WiFi can be performed during the initial setup and configuration, or later at a time you choose.

Connecting to WiFi – Initial Setup:

After the Configuration step during the initial install, you will be prompted to connect your VisionPRO WiFi 8000 to your Home WiFi.

The VisionPRO WiFi 8000 (TH8321WF) can be connected to WiFi on the thermostat itself after initial setup / configuration, or from the Menu > WiFi Setup screen. After successful connection, register your product on the mytotalconnectcomfort.com/portal website to complete the process and control the thermostat remotely.

The VisionPRO WiFi 8000 (RTH8580WF / TH8320WF) uses a 3-step connection and registration process

Step 1 – Connect your mobile device to the thermostat’s WiFi network (NewThermostatxxxxxx)

Step 2 – Connect the thermostat to your home WiFi (via an internet browser on your mobile device)

Step 3 – Register with Honeywell / resideo. (Performed in the My Total Connect Comfort web portal)

*Registration cannot be performed with the mobile app, currently only supported via the web portal*

  • Step 1 – Connecting your mobile device to the thermostat’s WiFi network (NewThermostatxxxxxx)Once installed and configured, the (TH8320WF / RTH8580WF) thermostat will display “WiFi Setup”. Open the Settings – WiFi on your mobile device and connect to the WiFi network named “NewThermostatxxxxxx”.*If your thermostat does not display WiFi Setup remove the thermostat faceplate from the wall plate for 30 seconds and then reattach it. If WiFi setup does not display, enter the Installer Setup (press the System button, then hold the center blank box at the bottom of the thermostat display for 5-10 seconds until the screen changes) and use the User / Installation Guide to navigate the settings to function 0890 . Make sure function 0890 is set to 1, then proceed to function 0900. Use the up or down arrow to change function 0900 function to 0 then press done. WiFi setup will then be displayed on the screen. Return to step 1.***TH8321WF – After initial configuration, you will be prompted to connect to WiFi. Select your Home WiFi network, then enter the password on your thermostat screen**
  • Step 2 – Connect the thermostat to your home WiFi (via an internet browser on your mobile device)Skip this step for the TH8321WF.TH8320WF / RTH8580WF – After connecting to the thermostat WiFi, open a web browser (Safari, Chrome, etc.) You should be automatically guided to a page labeled “Thermostat WiFi Setup. If you are not automatically guided there, enter the IP address: 192.168.1.1 into the address bar on your browser to navigate there manually.You should see your Home WiFi network listed. Select it and enter your WiFi password. After a brief connection period, your thermostat will display a “Connection Success” message. Reconnect your phone to your home WiFi network if your device does not reconnect automatically*If you do not see your home WiFi network, refresh the list. If your WiFi network is still not displayed, check the Trouble Connecting? / WiFi network recommendations below.*
  • Step 3 – Register at mytotalconnectcomfort.com/portalRegistration is completed at mytotalconnectcomfort.com/portal. Navigate to the page and create an account / login.Select the “Add Device” icon and Input the MAC ID / CRC for your device. (MAC ID / CRC are located on your thermostat information card, on the back of the thermostat, or from the Menu > Equipment Status screen])Complete the security check (if prompted) and follow the directions within the web portal to complete the registration.

https://www.honeywellhome.com/us/en/support/how-do-i-change-or-reset-the-wifi-connection-on-my-rth8500wf-wifi-series-wifi-touchscreen/

Water Temperature and Fish Health

It’s important to keep our aquariums within a certain temperature range to make sure the fish and other aquatic creatures we keep are happy and healthy. Too high or too low, and our aquatic pets will suffer. The temperature range that’s best for each creature depends on what part of the world they’re native to. Tropical fish, for example, do best between 75° and 80°F, goldfish and other “cold-water” species prefer temperatures below 70°F, and temperate fish can be found in habitats that overlap tropical and cold-water realms.

Fish are cold-blooded – aka ectothermic or poikilothermic – animals, meaning they cannot control their body temperature. Instead, they rely on the temperature of their environment to regulate their metabolisms and activity levels. When it’s too cold, they’re less active, their appetite is reduced and their immune systems are compromised, making them more susceptible to disease.

When it’s too warm, their metabolisms and breathing speed up, and they use more oxygen. The problem is, as water warms up it holds less oxygen, which further stresses the fish. Once again, they become more susceptible to disease, and in extreme cases, they can experience organ damage or even suffocate. Making matters worse, above 90°F, the beneficial bacteria that maintain balance in an aquarium begin to die, creating the potential for dangerous ammonia and nitrite spikes.

In the Wild

Water temperature in nature isn’t always constant. In fact, it can fluctuate quite a bit. Some days are sunny, some are cloudy. There may be seasonal changes as you get further away from the equator. Sometimes it rains, which can cool things down considerably. The water near the surface is usually quite a bit warmer than just a few feet below. And what happens when the sun goes down at night?

There are two major differences between natural habitats and our aquariums when it comes to temperature. First, fish in the wild can usually move to a more desirable spot if they don’t like the temperature. And second, temperature changes tend to occur gradually in nature due to the massive volumes of water involved, so fish have time to adapt, or move. Not so in an aquarium.

In the Aquarium

Unlike nature, where water temperature can vary in different micro-habitats, the temperature in an aquarium tends to be uniform throughout the tank. Aquarium fish can’t move from a less favorable spot to one that’s more comfortable if the temperature is outside their preferred range. In addition, temperature changes are often more extreme and happen much more rapidly in an aquarium, giving our fish less time to adapt.

Fish that are kept at the wrong temperature long-term may not grow as large, their colors may be muted, they may be less inclined to breed, and they may not live as long. A sudden drop in temperature is often linked to the onset of Ick and other parasite outbreaks.

Maintaining Proper Temperature

Now that we understand how important maintaining proper water temperature is for our fish, let’s look at how to achieve it:

  • Avoid placing your aquarium near sunny windows, exterior doorways, heating and air conditioning vents, fireplaces and drafty areas that can affect water temperature.
  • Choose a quality heater that is designed for your tank size.  (Large aquariums may require more than one heater.)  Use the Aqueon Heater Guide to select the right size heater for your aquarium.
  • Make sure there is adequate circulation around your heater to ensure even heat distribution.  (This will also prolong the life of the heater.)
  • Install an accurate thermometer and check it regularly to make sure your heater is maintaining the right temperature.
  • When performing water exchanges, match the temperature of replacement water as closely as possible to your aquarium.

Heating an aquarium is relatively straight-forward, but what happens when hot weather makes your aquarium too warm? Dialing the A/C down a few notches can be expensive, and what if you don’t have air conditioning? An easy solution is to open the tank lid and direct a fan across the water surface to create evaporative cooling.  (Lower the water level slightly to prevent fish from jumping out.)  Aquariums with cold-water fish or sensitive corals may require a chiller. For additional tips on cooling your aquarium, visit How to Keep Your Aquarium Cool in Summer Heat.

Mixing Different Fish

When stocking your aquarium, choose fish whose preferred temperature ranges match the temperature of your tank. Things can get a little tricky, however, when the upper limit of one species coincides with the lower limit of another. Trying to find a happy middle ground may stress both fish because one is always a little cold, and the other is a little warm. While they may tolerate the situation, neither of them will thrive. Always set your heater for the middle of your fishes’ preferred temperature range and choose fish that share the same temperature requirements.

Maintaining a stable temperature that matches your fishes’ needs isn’t difficult, and your fish will thank you for it!

Source: https://www.aqueon.com/